ORIENTAL UNIVERSITETIQidiruvПоискSearch
Oriental universiteti nashriyotiIlmiy jurnallar platformasiПлатформа научных журналовScholarly journals platform

Toʻliq matnПолный текстFull text

Mathematical modeling of methane combustion processes with a finite rate of chemical reaction

Aminov Xayotjon Xalimjonovich, Ergashev Dilshodjon Yo‘ldosh o‘g‘li

Matn PDF dan avtomatik ajratilgan: ekran oʻqiydigan dasturlar, telefon va qidiruv uchun. Rasmiy nusxa — PDF.Текст извлечён из PDF автоматически — для программ чтения с экрана, телефонов и поиска. Официальная версия — PDF.Text was extracted from the PDF automatically for screen readers, phones and search. The PDF remains the version of record.

PDF ni oʻqishЧитать PDFRead the PDF → Nashr kartasiКарточка изданияRecord

MATHEMATICAL MODELING OF METHANE COMBUSTION
PROCESSES WITH A FINITE RATE OF CHEMICAL REACTION

CHEKLANGAN TEZLIKDAGI KIMYOVIY REAKSIYADA METANNING
YONISH JARAYONINI MATEMATIK MODELLASH

МАТЕМАТИЧЕСКОЕ МОДЕЛИРОВАНИЕ ПРОЦЕССОВ ГОРЕНИЯ
МЕТАНА С КОНЕЧНОЙ СКОРОСТЬЮ ХИМИЧЕСКОЙ РЕАКЦИИ

Aminov Xayotjon Xalimjonovich,
Oriental universiteti,

Aniq fanlar kafedrasi mudiri, PhD, dots v.b.
Tel.: +998 99 909-72-36

hayotjonaminov@gmail.com

Ergashev Dilshodjon Yo‘ldosh o‘g‘li,
O‘zR FA, Mexanika va inshootlar seysmik mustahkamligi instituti;

Oriental universiteti
Tel.: +998 90 980-80-77
dilshod77m@gmail.com

Annotation: This paper proposes a numerical method for solving the problem
of propagation and combustion at a finite rate of a chemical reaction with an oxidizer
in a satellite air flow in a turbulent jet. Methane is considered as fuel. Dimensionless
equations of the turbulent boundary layer of reacting gases in the Mises coordinates
were used for modeling, as well as a two-layer six-point implicit finite-difference
scheme for the numerical solution, which ensures the accuracy of the second-order
approximation in both coordinates. Due to the nonlinearity of the differential equations
of conservation of substance, an iterative process was organized. Some results of the
computational experiment are presented. Comparison of the results of calculating the
change in the temperature of the axial flow according to the modified turbulence
models and experimental data were presented.

Keywords: Mathematical model, turbulent jet, chemical reaction rate, total
enthalpy, Arrhenius law, finite differences, numerical algorithm, computational
experiment.

Annotatsiya: Ushbu maqolada turbulent oqimda gazning yondosh havo oqimi
bilan oksidlovchi ishtirokida kimyoviy reaksiyaning cheklangan tezligida tarqalishi va
yonishi masalasini hal qilishning raqamli usuli ko‘rib chiqildi. Ma’lumki, metan
yonilg‘i hisoblanadi. Modellashtirish uchun Mizes koordinatalarida reaksiyaga
kirishuvchi gazlarning turbulent chegara qatlamining o‘lchovsiz tenglamalari,

shuningdek, raqamli yechim uchun ikkinchi darajali yaqinlashuvning aniqligini
ta’minlovchi ikki qavatli va olti nuqtali cheklangan yashirin farqli sxemasi
qo‘llanilgan. Moddaning saqlanish differensial tenglamalarining chiziqsizligi tufayli
iterativ jarayon tashkil etildi. Hisoblash tajribasining ba’zi natijalarini keltirib o‘tdik.
O‘zgartirilgan turbulentlik modellari va eksperimental ma’lumotlar bo‘yicha tekis
oqim haroratining o‘zgarishini hisoblash natijalari taqqoslandi.

Kalit so‘zlar: Matematik model, turbulent reaktiv, kimyoviy reaksiya tezligi,
umumiy entalpiya, Arrenius qonuni, cheklangan farqlar, sonli algoritm, hisoblash
tajribasi.

Аннотация: В работе предложен численный метод решения задачи о
распространении и горении с конечной скоростью химической реакции с
окислителем в соседнем потоке воздуха в турбулентной струе. Метан считается
топливом. Для моделирования использовались безразмерные уравнения
турбулентного пограничного слоя реагирующих газов в координатах Мизеса, а
также двухслойная шеститочечная неявная конечно-разностная схема для
численного решения, обеспечивающая точность второго порядка приближения в
обе координаты. Ввиду нелинейности дифференциальных уравнений
сохранения вещества был организован итерационный процесс. Представлено
сравнение результатов расчета изменения температуры осевого течения по
модифицированным моделям турбулентности и экспериментальным данным.

Ключевые слова: Математическая модель, турбулентная струя,
скорость химической реакции, полная энтальпия, закон Аррениуса, конечные
разности, численный алгоритм, вычислительный эксперимент.

INTRODUCTION
In the economy of Uzbekistan, gas-oil industry has its significant role. And gas
processing is considered as an important stage in this industry. That’s why we analize
the matter of methane combustion in this article. Combustion is a physical and
chemical process, which is a chemical oxidation reaction, accompanied by the release
of heat and a bright glow.
The choice of the dissipation rate of turbulent energy as the second independent
variable for describing the properties of turbulence is very convenient, since, on the
one hand, it is possible to obtain a constitutive equation for it under fairly clear physical
prerequisites, and, on the other hand, this quantity is included in the constitutive
equation for the energy of turbulent pulsations. The family of these models has
received the name of turbulence models, with the help of which individual problems
of isothermal jets and jets of reacting gas mixtures are currently solved. (Кондратьев
Л., Медведев С., 1983: 17)

The analysis of scientific literature presented below shows that the processes of
homogeneous combustion of gases, the main component of which is methane, have not
yet been studied enough. As is known that combustion, due to the imperfection of the
fundamental foundations of chemical exothermic reactions under conditions of
turbulent jet flow nozzles, scientific work in this area continues to develop.

LITERATURE REVIEW
The most general analysis of the combustion of unmixed gases was carried out by
Y.B. Zeldovich. (Иевлев В., 1975: 4) One of the first serious attempts to construct a
theory of a turbulent plume belongs to Schwab, (Шваб А., 1948) who was the first to
develop a general scheme of the process from the standpoint of the theory of free jets.
Subsequently, diffusion combustion was studied by the authors L.Vulis, L.Yarin and
others. (Вулис Л., Ярин Л., 1978)
The flame theory based on the assumption of the generality of the transport
mechanism in turbulent jets and in a burning flame is described in the works of
M.Hamdamov, A.Mirzoyev, E.Buriev, N.Tashpulatov. (Hamdamov M., Mirzoyev A.,
Buriev E., Tashpulatov N., 2021) The results of computational-theoretical and
experimental studies of the aerodynamics of an axisymmetric turbulent plume are
presented, which make it possible to determine the location of the flame front, the
distribution of temperature, concentrations and velocity in the cross sections of the
flame. A quantitative assessment and a physical explanation are given for such facts
known from experiment as an increase in the degree of turbulence in the flame front,
the difference from unity in the values of Pr and Sc in shear flows. The paper of
V.Zhukov, N.Novikova, and O.Feodoritova describes a technique and presents some
results of a numerical solution of the problem of a turbulent diffusion plume, taking
into account the finite reaction rate. Numerical integration of the system of equations
of the boundary layer was carried out in the Mises-Mager-Libby plane and using an
explicit four-point finite difference scheme. The momentum equation is linearized.
Despite these assumptions, the calculation results agree satisfactorily with the
experimental data. (Zhukov V., Novikova N., Feodoritova O., 2018: 32)
In the works of P.Libby and P.Williams, a review of the latest achievements in
the field relating to the study of chemical reactions in a turbulent flow. Two limiting
cases are considered - combustion of a homogeneous mixture and diffusion
combustion. It is shown that the assumption of an infinitely high rate of a chemical
reaction makes it possible to substantially simplify the description of the combustion
process. Calculation methods are analyzed that make it possible to take into account
small deviations of the medium from the thermodynamic equilibrium state. It is
emphasized that such calculations are especially important when predicting the
concentration of toxic agents (nitrogen oxide, soot) in a flame. The influence of heat

release on the flow field, in particular, on the characteristics of turbulence, is also
considered. Particular attention is paid to the effects associated with density
fluctuations. Based on the analysis performed, it was concluded that the models
developed to describe flows with a constant density may be unacceptable for
calculating turbulent combustion.

When considering the efficient combustion of gaseous fuel, one should take into
account the results of studies of a swirling jet, which are successfully used in the
national economy as one of the rational ways to intensify the processes of mixing and
combustion. In the book of H.Haji, the spatial integration method was used to solve the
equations describing the axisymmetric incompressible turbulent swirling jet flow. The
k  model with isotropic turbulent viscosity is applied. In addition to the distribution
of average velocities, such turbulence characteristics as Reynolds stress, turbulent
kinetic energy, and dissipation rate are determined. Good agreement with experimental
data is obtained. It is shown that the assumption of isotropic turbulent viscosity is fully
justified. (Haji H., 1986)

PHYSICAL STATEMENT OF THE PROBLEM
A turbulent jet of combustible gas is considered, which flows out of a round
nozzle with a diameter of a  0.6sm and propagates in a cocurrent flow (in a flooded
space) of an oxidizer at a finite chemical velocity.
The velocity distribution in the outlet section of the nozzle and in the co-flow, as
well as the initial (at x=0) distributions of temperature and concentration of fuel and
oxidizer, will be considered given, uniform, homogeneous, and there is also a
tangential discontinuity of indicators at the nozzle boundary.

MATHEMATICAL MODEL
In the approximation of the theory of a turbulent boundary layer, the system of
equations for the turbulent motion of a multicomponent gas in the presence of a
chemical reaction, i.e. combustion, between the components and when the Lewis
number for the components is equal to unity ( Lei  1, i.e. Pr  Sci ), can be written in
cylindrical coordinates, taking into account the k  model:

 u u 1   u 
u      (  t )r ,
 x r r r  r 
  ur     r   0,
 x r

 H H 1   H 
u      (  t )r ,
 x r Pr r r  r 
 cn
cn 1   cn 
u     (  t )r   n n  1..N ,
 x r Sc r r  r 

 k k 1    k  
u      (  t )r    k,
 x r r r  r 

   1    
u      (  t )r    . 2

 x r r r  r 

k 2  u 2
t  , G  4t   , c1  1.44, c2  1.92, c  0.09, k  1,   1.3.
  r 

This system is closed by the following dependencies:

N R0  N 1

H  cpT  c2h2*, cp  cpncn, p   T  const, m   mn / cn  ,
n1 m  n1 

Here and further u, v – average longitudinal and transverse (radial) components

of the velocity vector m s1 in cylindrical coordinates; , Т – density kg m3  and

absolute temperature (K) of the gas mixture; Pr, Scn – turbulent analogues of the Prandtl

and Schmidt numbers; ci – mass concentration of the -th gas component in the mixture

(кg кg-1); n – mass rate of formation or disappearance i  th gas component kg m3 s1

N

; cp  cpncn and cpi – heat capacity of the gas mixture and i - th component at constant
n1

pressure Dj kg1 K 1 ; hi* – calorific value of the i -th component Dj Kg1 K 1 ;  , t –

kinematic coefficients of laminar and turbulent viscosity m2 s1  ; The gas mixture is

assumed to be perfect, therefore its state satisfies the Mendeleev-Clapeyron equation:

(Haji H., 1986: 170)

p  R0T / m ,

Where m N c 1 and m n – molar masses of the gas mixture and the n -th
/m
 n n 
 n1 

component of the gas kg mol1 ;

R0 – universal gas constant 8341.41 DJ mol1 K 1  .

The boundary conditions of the problem for the inlet section x  0 are given as:

F2 at the cut of the pipe,

F 0, r  

F1 on satellite treacle.

Here F  u, T, cn, t . The value of the total enthalpy for the inlet section is

determined according to the above formula. At x  0 no flow conditions are set on the

jet axis:

F  x,0  0, v  x,0  0 ,

r

and at the jet boundary - according to the indicators F1 co-flow.

Methane is considered as a combustible gas. The one-stage methane combustion

kinetics in air is given by the stoichiometric equation

CH4  2O2 CO2  2H2O  h2* .

Indexes 1, 2, 3, 4 and 5 highlight the parameters of the components - oxygen,

methane, carbon dioxide, water vapor and nitrogen, respectively. According to this

entry, the molar masses of the components are m1  32.000 g / mol, m2 16.043 g / mol,

m3  44.011 g / mol, m4  18.020 g / mol, m5  28.016 g / mol , 1  5 mol,  2  1 mol, 3  3 mol,

4  4 mol, 5  0 mol . Net calorific value of methane – 50.2 MDJ/kg.

Then, according to A.Demenkov, which is borrowed from M.Hamdamov, the

reaction rate of methane with oxygen has the form:

2  Ea  с12 с2 3  Ar2   кг  (3)
2   An1 n2 exp      A 2  exp     3 .
 RT  m1 m2  T  м с

At the same time, for the remaining components, the rate of chemical

transformations in the dimensional form is represented as

1  1m1 2 , 3    3m3 1, 4   4m4 1, L(cn )  n ,
 2m2  2m2  2m2

5  0 5  0.

cn cn 1   cn 
L(cn )  u  v   r  t  
x r Scn r r  r 

The boundary conditions of the problem for the mass concentration of

components for the inlet section x  0 are given in the following form:

at 0  r  a : cn 0,r  cn 2 ; at a  r  r : cn 0, r  cn 1 .

In particular, if in the composition of the combustible mixture methane is 50% by

mass, and oxygen is 50%, then you can take c2 2  0,500, c1 2  0,500. The

composition of the air is taken as c1 1  0,232, c5 1  0,768 . In this case, the remaining

concentrations of components at the input of the computational domain have zero

values: c2 1 c3 1  c4 1  c3 2 c4 2  c5 2  0 .

At x  0 symmetry conditions are set on the jet axis: cn  x, 0  0 , and at the jet

r

boundary - according to the air flow indicators: cn  x, r   cn 1 .

By virtue of ignoring thermal and barodiffusion, as well as the same values of the

turbulent analogue of the Schmidt number for the components, the convective and

diffusion transfers of the components have the same intensity. In this regard, and taking

into account the combustion kinetics, we write the conservation equations for five

components in the form

L(c2 )  2, L(c1)  1m1 2, L(c3)  3m3 2, L(c4)  4m4 2, L(c5)  0.
 2m2  2m2  2m2

Using the first of these equations, we reduce the following three equations to a

homogeneous form:

Lc1  1m1 c2   0, Lc3  3m3 c2   0, Lc4 4m4 c2   0.
 2m2   2m2   2m2 

At n 1,3,4 we introduce the notation cn  cn  nmn c2 (the upper sign refers to
 2m2

n 1, and the lower one - n  3, 4 ), we write the equations in a single form L(cn )  0 and

formulate the boundary conditions for the air flow at the inlet in the form

(cn )1  cn 1  nmn c2 1 , for fuel flow – (cn )2  cn 2 nmn c2 2 , as well as on the
 2m2  2m2

boundary and axis of the jet.

If we introduce relatively redundant functions in the form of dependence

Cn  cn  (cn )1 , then for the transformed three equations and the concentration

(cn )2  (cn )1

equation c5  c5 inert gas, the boundary conditions become the same: at the fuel inlet

– Cn   1, at the air inlet and at the boundary layer boundary – Cn   0 , and on the jet21

axis – Cn  х,0  0 . Accordingly, these equations become mutually equivalent and can

r

be replaced by one equation for C . In this regard, instead of five equations of the
diffusion problem, the equation is solved for C without source term and equation for
fuel concentration c2 considering the rate of a chemical reaction.

Reverse transition from relatively excessive concentration C to mass

concentrations of components cn at n 1,3,4 carried out according to the formula

cn  (cn )2  (cn )1 C  (cn )1   nmn c2 ,

m2 2

at n  5 – according to the formula c5  (c5 )2  (c5 )1 C  (c5 )1 .

The process of combustion of gaseous fuel is carried out at rather low speeds
relative to the speed of sound. Therefore, the kinetic energy of the gas can be neglected.

Then, a substitution similar to that introduced for the concentration can also be used

for the total enthalpy, which leads to the normalization of the total enthalpy,

H  H  H1  C .

H2  H1

where H1  cp 1T1  c2 1 h2*, H2  cp 2 T2  c2 2 h2* .

In this case, the value of the temperature of the mixture is calculated by the

formula

H  N

T   c2h2* / cp  H1  H2  H1  H  c h* / cpncn .

22
  n1

The value of the density of the gas mixture necessary for further calculations is

found by the formula

 Np .

R0T cn / mn
n1

Introduction of dimensionless variables and Mises variables. To solve the

problem, we switched to dimensionless variables using the characteristic quantities

a, u2, 2 :

x  x , r  r , u  u ,    , l1  Re  u2a , t  t , k  2 k ,    .
a a u2 2 l au2 u2 au2

The peculiarity of the problem under consideration is that the flow propagates

along the x axis from left to right and there are no boundary conditions in the right part

of the flow region, which means that they do not affect the propagation processes.

Accordingly, it is expedient to describe the process in von Mises coordinates and

introduce the stream function  according to the relations

ur   , r   
r  x

The derivatives in the equations are replaced according to the dependencies:

               r  ,
x  x  x   x   

           ur  .
r  r  r  r  

In this case, the dimensionless equation of conservation of the total mass is

uniquely satisfied. Thus, the differential equations take the form:

 u  1 u  2u r2 l t  u ,

      

 1   2u r2 l t  H 
H
   Pr     ,
(4)
 1   2u r2 l t  c2  c1c2 2
 c2
    Ar1 exp(Ar2 / T ),
  Sc      u

 k 1     2ur2 k   k
  l t    ,
 k      u
 1   2ur2
  2
 l t    4  
         au

and closing relations

H1   H2  H1  H  c2h2* mT2 k2
T ,  , t  c .
cp (m)2T 

At the entrance   0 the following conditions are imposed on the computational

domain:

At 0   1: u 1, H 1, c2  c2 2 , k 1,  1.

At 1   : u  u 1 , H  0, c2  c2 1 , k  k1 ,   1 .
k2 2

If a   0, we have:

At   0 : u  0, H  0, c2  0, k  0,   0.
    

At    : u  u 1 , H  0, c2  c2 1 , k  k1 ,   1 .
k2 2

The numerical solution is a two-layer six-point implicit finite-difference scheme

that provides second-order approximation accuracy in both coordinates. An algorithm

and a calculation program with internal and external iteration for the longitudinal

velocity and other indicators of heat and mass transfer processes have been developed.

Calculation results. Calculations were carried out in accordance with the above.

The mass composition of air was given as c11  0.232, c5 1  0.768 . The composition of

the combustible mixture included propane-butane mixture and nitrogen. The velocity

of the main flow was 61 m/s, and that of the cocurrent flow was 18.3 m/s. Air

temperature – T1  300K , and combustible mixture – T2  300 K . Step of numerical

integration over x  was equal to 0.001, on  – 0.02. When switching to a

dimensionless coordinate, the data were presented with a constant step of 0.02.

Fig.1. Comparison of the axial value of the kinetic energy of turbulence, carried
out on the basis of the program and Ansys Fluent. At a  0.001 м the largest radial
coordinate of the highest temperature (690 K) in the section r / a  2.6 observed at
x / a 14 . The combination of the highest and axial temperatures (at 867 K) occurs at
x / a  30 . The highest temperature in the calculation area is 1134 K, and the axial
temperature at the end of the conditional flame (at Hось  0.01) equal to 756 K.

2300

Tos, Tmax

1900

1500

1100

700

1 2 3 4 5 6

300

0 100 200 300 400 500 600 x/a 700

Fig. 2. Curves of the largest (dashed) and axial (solid) temperature values along

the dimensionless length of the torch at different radii of the fuel nozzle: 1, 2 – 0.05

m; 3, 4, 0.01 m; 5, 6 – 0.001 m

Fig.3. Radial velocity

CONCLUSION
Methods for introducing the Schwab-Zeldovich functions and relatively excess
enthalpy are shown for the case of turbulent combustion of methane in a cocurrent air
flow with a finite velocity flowing out of the nozzle. A numerical method based on
finite-difference schemes is proposed for solving the problem of the propagation of an
axisymmetric fuel jet in a cocurrent air flow in the von Mises variables using the
turbulence model k 
For the numerical solution of the problem, an approximation scheme of the second
order of accuracy in both coordinates was used, which gives a more accurate picture of
the object and the physical essence of the combustion process. An algorithm and a
calculation program with internal and external iterations for the longitudinal velocity
and other indicators of heat and mass transfer processes have been developed.
According to the computational experiments in this work and comparison of full-scale
experiments, it was revealed that with an increase in the concentration of fuel in the
composition of the mixture of the main flow, expansion and elongation of the flame
front are observed. Overall, this mathematical modeling offers minimizing expances
on methane combustion and leads to economic efficiency.

REFERENCES:
1. ANSYS Fluent Theory Guide. (2013) SAS IP, Inc is certified to ISO 9001:2008
2. Kondratyev L.V., Medvedev S.V. (1983) Primeneniye dvuxparametricheskoy
modeli turbulentnosti dlya rascheta struynix techeniy // Fiziko-ximicheskiye protsessi
v energeticheskix ustanovkax. – Minsk. – S. 16-19. (In Russian)
3. Ievlev V.M. (1975) Turbulentniye dvijeniya visokotemperaturnix sploshnix
sred. – Moskva: Nauka. – 256 s. (In Russian)

4. Shvab A.B. (1948) Svyaz mejdu temperaturnimi i skorostnimi polyami
gazovogo fakela // V sb. Issledovaniye protsessov goreniya naturalnogo topliva. Pod
red. G.F.Knorre. – Gosenergoizdat. (In Russian)

5. Vulis L.A., Yarin L.P. (1978) Aerodinamika fakela. – Leningrad: Energiya. –
216 s. (In Russian)

6. Hamdamov M., Mirzoyev A., Buriev E., Tashpulatov N. (2021) Simulation of
non-isothermal free turbulent gas jets in the process of energy exchange. E3S Web of
Conferences. 264, 01017.

7. Zhukov V.T., Novikova N.D., Feodoritova O.B. (2018) On the methodology for
numerical simulation of combustion processes in a high-speed combustion chamber
based on openfoam // Mathematical Modeling (Moscow), volume 30, no. 8. – C. 32-50

8. Libby P.А., Williams P.A. (1981) Soma Omplication of Recent heoretical
Studies in Turbulent Combustion //AIAA J., 19, N 3, pp. 261-274

9. Haji H. The Prediction of Turbulent Swirling Jet Flow // Int. J. Heat and Mass
Transfer, 1986, 29, R 2, pp. 169-182.

10. Hamdamov M., Khujaev I., Bazarov O., Isabaev K., Axisymmetric turbulent
methane jet propagation in a wake air flow under combustion at a finite velocity. IOP
Conference Series: Materials Science and Engineeringthis link is disabled, 2021,
1030(1), 012163

11. Demenkov A. G., Ilyushin B. B., Chernykh G. G. (2008) Numerical
simulation of axisymmetric turbulent jets // Applied Mechanics and Technical Physics.
V. 49, No. 5. – pp. 55-60

12. Xujayev I.K., Xamdamov M.M. (2021) Rasprostraneniye osesimmetrichnoy
turbulentnoy strui metana v sputnom potoke vozduxa pri gorenii s konechnoy
skorostyu. ISSN 1812-3368. Vestnik MGTU im. N.E. Baumana. Ser. Yestestvenniye
nauki. № 5. DOI: 10.18698/1812-3368-2021-5-89-108 (In Russian)

FOYDALANILGAN ADABIYOTLAR RO‘YXATI:
1. ANSYS Fluent Theory Guide. (2013) SAS IP, Inc is certified to ISO 9001:2008
2. Кондратьев Л.В., Медведев С.В. (1983) Применение
двухпараметрической модели турбулентности для расчета струйных течений //
Физико-химические процессы в энергетических установках. – Минск. – С. 16-19.
3. Иевлев В.М. (1975) Турбулентные движения высокотемпературных
сплошных сред. – Москва: Наука. – 256 с.
4. Шваб А.Б. (1948) Связь между температурными и скоростными полями
газового факела // В сб. Исследование процессов горения натурального топлива.
Под ред. Г.Ф.Кнорре. – Госэнергоиздат.
5. Вулис Л.А., Ярин Л.П. (1978) Аэродинамика факела. – Ленинград:
Энергия. – 216 с.

6. Hamdamov M., Mirzoyev A., Buriev E., Tashpulatov N. (2021) Simulation of
non-isothermal free turbulent gas jets in the process of energy exchange. E3S Web of
Conferences. 264, 01017.

7. Zhukov V.T., Novikova N.D., Feodoritova O.B. (2018) On the methodology for
numerical simulation of combustion processes in a high-speed combustion chamber
based on openfoam // Mathematical Modeling (Moscow), volume 30, no. 8. – C. 32-50

8. Libby P.А., Williams P.A. (1981) Soma Omplication of Recent heoretical
Studies in Turbulent Combustion //AIAA J., 19, N 3, pp. 261-274

9. Haji H. The Prediction of Turbulent Swirling Jet Flow // Int. J. Heat and Mass
Transfer, 1986, 29, R 2, pp. 169-182.

10. Hamdamov M., Khujaev I., Bazarov O., Isabaev K., Axisymmetric turbulent
methane jet propagation in a wake air flow under combustion at a finite velocity. IOP
Conference Series: Materials Science and Engineeringthis link is disabled, 2021,
1030(1), 012163

11. Demenkov A. G., Ilyushin B. B., Chernykh G. G. (2008) Numerical
simulation of axisymmetric turbulent jets // Applied Mechanics and Technical Physics.
V. 49, No. 5. – pp. 55-60

12. Хужаев И.К., Хамдамов М.М. (2021) Распространение осесимметричной
турбулентной струи метана в спутном потоке воздуха при горении с конечной
скоростью. ISSN 1812-3368. Вестник МГТУ им. Н.Э. Баумана. Сер.
Естественные науки. № 5. DOI: 10.18698/1812-3368-2021-5-89-108