ORIENTAL UNIVERSITETIQidiruvПоискSearch
Oriental universiteti nashriyotiIlmiy jurnallar platformasiПлатформа научных журналовScholarly journals platform

Toʻliq matnПолный текстFull text

Application of Kirchhoff’s laws for the calculation of a two-loop network of pipelines in a stationary laminar flow mode

Mamadaliev Khusniddin Abdujalilovich, Hamdamov Muzaffar Muhiddinovich

Matn PDF dan avtomatik ajratilgan: ekran oʻqiydigan dasturlar, telefon va qidiruv uchun. Rasmiy nusxa — PDF.Текст извлечён из PDF автоматически — для программ чтения с экрана, телефонов и поиска. Официальная версия — PDF.Text was extracted from the PDF automatically for screen readers, phones and search. The PDF remains the version of record.

PDF ni oʻqishЧитать PDFRead the PDF → Nashr kartasiКарточка изданияRecord

APPLICATION OF KIRCHHOFF’S LAWS FOR THE CALCULATION OF A
TWO-LOOP NETWORK OF PIPELINES IN A STATIONARY LAMINAR
FLOW MODE

Mamadaliev Khusniddin Abdujalilovich
Tashkent University of Information Technologies
named after Muhammad al-Khwarizmi, Tashkent, Uzbekistan

Tel.: +99871 238-64-52
e-mail: x.mamadaliyev@tuit.uz

Hamdamov Muzaffar Muhiddinovich
Institute of Mechanics and Seismic Resistance of Structures named after

M.T.Urazbayeva;
Teacher of the Department of “Exact sciences”

of the Oriental University
Te.l: +998 97 738-40-62
e-mail: mmhamdamov@mail.ru

Annotation. The application of Kirchhoff's laws to hydraulic systems has
emerged as a valuable methodology for analyzing the flow characteristics in looped
pipeline networks. This study introduces a systematic approach to applying these laws
in the hydraulic calculation of a simple looped network, particularly highlighting the
relevance of average geometric gradients of pipelines that are employed to facilitate
the transport of liquid media. In contrast to direct current electric circuits, which exhibit
distinct characteristics governed by voltage and current, the hydraulic context
necessitates an adaptation of Kirchhoff’s principles to account for fluid dynamics and
pressure variations within pipelines. The derivation of a comprehensive system of
equations tailored to laminar flow conditions of an incompressible fluid serves as the
foundation of this analysis. By employing the principles of conservation of mass and
energy, the resulting equations encapsulate the interplay between flow rates, pressures,
and geometric configurations inherent to the network.

Keywords: quasi-one-dimensional motion, hydraulic network, double-circuit
pipeline network, Kirchhoff’s law.

STATSIONAR LAMINARGA ASOSLANGAN OQIM REJIMIDAGI IKKI
KONTURLI QUVUR TARMOG‘INI HISOBLASHDA KIRCHHOFF
QONUNLARIDAN FOYDALANISH

Mamadaliyev Xusniddin Abdujalilovich
Muhammad al-Xorazmiy nomidagi

Toshkent axborot texnologiyalari universiteti

Tel.: +99871 238-64-52
e-mail: x.mamadaliyev@tuit.uz

Hamdamov Muzaffar Muhiddinovich
O‘zbekiston Respublikasi Fanlar akademiyasi
Mexanika va inshootlarning seysmik mustahkamligi instituti;

Oriental universiteti
Aniq fanlar kafedrasi o‘qituvchisi

Tel.: +998 97 738-40-62
e-mail: mmhamdamov@mail.ru

Annotatsiya. Kirchhoff qonunlarining gidravlik tizimlarga qo‘llanilishi, aylana
qolgan qoplama tarmoqlaridagi oqim xususiyatlarini tahlil qilish uchun foydali bir
metodologiya sifatida paydo bo‘ldi. Ushbu tadqiqot, oddiy aylana tarmog‘ining
gidravlik hisob-kitobida bu qonunlarni qo‘llash uchun tizimli bir yondashuvni taqdim
etadi. Ayniqsa, suyuqlik vositalarini o‘tkazishda foydalaniladigan quvurlarning
o‘rtacha geometrik gradientlarining ahamiyatini ko‘rib chiqadi. To‘g‘ridan-to‘g‘ri
oqimdagi elektr zanjirlaridan farqli o‘laroq, bu zanjirlar tok va oqim tomonidan
boshqarilgan o‘ziga xos xususiyatlarni ko‘rsatadi, gidravlik kuch esa quvurlar ichidagi
suyuqlik harakati va bosim o‘zgarishlarini hisobga olish uchun Kirchhoff prinsiplarini
moslashtirishni talab qiladi. Siqilmaydigan suyuqlikning laminar oqim sharoitlariga
moslashtirilgan keng qamrovli tenglamalar tizimini hosil qilish ushbu tahlilning asosi
bo‘lib xizmat qiladi. Massaning va energiyaning saqlanishi prinsipi yordamida, hosil
bo‘lgan tenglamalar oqim tezliklari, bosimlar va tarmoqqa xos geometrik
konfiguratsiyalar o‘rtasidagi o‘zaro ta’sirni o‘rganadi.

Kalit so‘zlar: bir o‘lchovli kvazi harakat, gidravlik tarmoq, ikki aylana quvurcha
tarmog‘i, Kirchhoff qonuni.

ПРИМЕНЕНИЕ ЗАКОНОВ КИРХГОФА ДЛЯ РАСЧЕТА
ДВУХКОНТУРНОЙ СЕТИ ТРУБОПРОВОДОВ В СТАЦИОНАРНОМ

ЛАМИНАРНОМ РЕЖИМЕ ТЕЧЕНИЯ

Мамадалиев Хусниддин Абдужалилович
Ташкентский университет информационных технологий

имени Мухаммада аль-Хорезми
Тел.: +99871 238-64-52

e-mail: x.mamadaliiev@tuit.uz

Хамдамов Музаффар Мухиддинович
Академия наук Республики Узбекистан
Институт сейсмостойкости механики и конструкций;

Преподаватель кафедры Точных наук
университета Ориентал
Тел.: +998 97 738-40-62

e-mail: mmhamdamov@mail.ru

Аннотация: Применение законов Кирхгофа к гидравлическим системам
стало ценной методологией для анализа характеристик потока в кольцевых
трубопроводных сетях. В этом исследовании представлен систематический
подход к применению этих законов в гидравлическом расчете простой кольцевой
сети, в частности, подчеркивая значимость средних геометрических градиентов
трубопроводов, которые используются для облегчения транспортировки жидких
сред. В отличие от электрических цепей постоянного тока, которые
демонстрируют различные характеристики, регулируемые напряжением и
током, гидравлический контекст требует адаптации принципов Кирхгофа для
учета динамики жидкости и изменений давления в трубопроводах. Вывод
комплексной системы уравнений, адаптированной к условиям ламинарного
потока несжимаемой жидкости, служит основой этого анализа. Используя
принципы сохранения массы и энергии, полученные уравнения инкапсулируют
взаимодействие между расходами, давлениями и геометрическими
конфигурациями, присущими сети.

Ключевые слова: квазиодномерное движение, гидравлическая сеть,
двухконтурная трубопроводная сеть, закон Кирхгофа.

INTRODUCTION
Pipeline networks are widely used in engineering and technology. According to
their intended purpose, they serve for the transportation of target products (water, oil,
oil products, gases), thermal energy (heating networks) and for the transmision of
mechanical energy (hydraulic and pneumatic drives) (Anderson D., Tannehill J.,
Pletcher R., 1990).
Pipeline networks consist of point and line elements. Point elements are
sperchargers, consumer connection points, control fittings, bends, adapters, points of
connection and separation of parallel threads, and others. The main components of the
pipeline network are linear elements - pipelines (Popov D., 2001).
At the stage of designing a pipeline network for a given interval of flow of the
transported medium, the geometry of the network, the power of the blower and the
diameter (diameters) of the pipeline are selected, taking into account the remaining
point elements (Popov D., 2001). According to its geometry, the pipeline network can
have a linear structure, can be looped, or have a combined structure (Yuan Q., 2018)

The hydraulic calculation of the network is carried out using formulas obtained
for a stationary flow regime far from the inlet and without any obstacles. In this case,
the experimental results obtained by Nikuradze for the coefficient of resistance of a
pipe of circular cross section at various flow rates, diameters and equivalent roughness
of the pipe play an important role. The Nikuradze curves, constructed depending on
the Reynolds criterion, made it possible to distinguish laminar (at), transitional (at),
and turbulent (at) flow regimes in round pipelines (Sennova E., Sidler V., 1987). The
results of Nikuradze showed that in the turbulent flow regime, depending on the
equivalent roughness of the boundary of the free section of the pipe, smooth, mixed,
and development modes of flow around the roughness are formed.

In the works of Y. Korotaev, I. Khujayev and M. Hamdamov a one-term

representation of the drag coefficient is given in the form    k D Ren and to

approximate the curve of the drag coefficient in the corresponding flow regimes, the
formulas of Stokes, Zaichenko, Blasius, Leibenson and Shifrinson were used.

To calculate an elementary section of a gas pipeline with a variable cross-sectional

area f   D2 / 4 are based on solutions to a system of quasi-one-dimensional

equations compiled on the basis of comparison and physical interpretation of dozens
of publications:

( f ) t  (wf ) x  0,
(wf ) (w2 f )  p dz1  
    f   g   w | w | R,
 t x  x dx  4

   f  w2     w2  (wf )     wf       (1)
t   2  x   2  x velocity and

 dz1 df  T
wfg  p  Qf   kf   (T ,T ).
 dx dt x  x 

Here , p, w,T – cross-sectional average density, pressure,

temperature of the gas at the moment of time t ; , R  D / 2 – friction resistance

coefficient and pipe radius; g – gravitational force acceleration; k – coefficient of

thermal conductivity of gas in Fick’s law; z1(x) – leveling height of the pipeline axis.

The internal energy of the gas is taken in the form   cV T , cV – reduced isochoric

heat capacity of the gas.
Increasing the reliability and reducing the operating costs of the pipeline nework

is often achieved by using multi-loop networks with a complex topology. In this regard,

for the analysis of functioning, operational control and hydraulic calculation of multiloop networks, the development of mathematical and software is an urgent problem
today, since pipeline networks are a necessary attribute of the life support of the
population, energy and industry. This paper proposes a method for calculating a multiloop pipeline network with one supply, designed to transport fluid in a static mode of
operation.

It is known that Kirchhoff’s laws are widely used in mathematical modeling of
multi-ring electrical circuits. In this case, three groups of equations are compiled: the
equations of charge conservation in the nodes of the circuit, equations with the sums
of the voltage drop and electromotive forces in an arbitrary circuit circuit, as well as
closing relationships between the voltage drop in the sections and the current strength.

ANALYSIS AND RESULTS
Similar groups of equations can be compiled for the hydraulic network of
transport of incompressible liquids (cold and hot water, oil, oil products, etc.)
(Ermolaeva N., 2017). To do this, it is required to implement the first Kirchhoff’s law
in relation to the fluid flow in the nodes, and the second law - for the pressure drop in
an arbitrary circuit. The problem of adapting the method of calculating electrical
circuits in relation to hydraulic networks arises when compiling the third group of
equations, i.e. closing relations, because it is necessary to take into account the laws of
friction resistance in pipelines and the change in the height of the axis of the pipeline
in sections, which will lead to an additional change in fluid pressure in sections and the
network as a whole.

To derive closing relations, we use the quasi-one-dimensional equations of motion
of an incompressible fluid in a single section of the network

dp   g sin  w | w |  0, w D2 / 4  const. (1)
dx 2D

According to the first equation, the change in the static pressure p in the network
is due to the geometric mean slope of the pipeline sinα in the section and the friction
force described by the Darcy-Weisbach formula. The second equation reflects the
constancy of the fluid flow in the network sections.

In the static mode of network operation, the density  , diameter D , average speed
w and drag coefficient  for the site are constant values. Moreover, the value of the
pressure coefficient depends on the mode of fluid flow in the pipeline. To facilitate the
task, we confine ourselves to considering the laminar flow regime:

  64  64 , (2)
Re | w | D

where Re is the Reynolds criterion; ν is the kinematic coefficient of viscosity of
the transported liquid.

Using relation (2), defining the dynamic coefficient of the liquid in the form

   , and the volumetric flow rate of the liquid - in the form Q  wF  w D2 / 4 ,

together with the first equation of system (1), we obtain an equation for calculating the
pressure in a separate section of the network

dp  g sin   4 128Q  0.
dx D

Integration of this equation over the length l of the section leads to the
dependence

pe  pb   gh  4 128 l Q  0, (3)
D

Where pb , pe – static pressure values at the beginning and end of this section;
h - the total change in the leveling height of the pipeline in the section.

Relative to the i-th section of the network, dependence (3) can be written as

yi  zi  ri xi  0, (4)

where the following notation is used:
yi  ( pe )i  ( pb )i – static pressure difference in the i-th section;
 zi  ghi – the proportion of the change in the leveling height of the

pipeline axis in the pressure drop yi in the section;
ri  4 128 li – friction resistance in the area;
Di
xi  Qi  Di2wi / 4 – volume flow of liquid in the area.
The indicators participating in dependence (4) have dimensions according to SI.

Accordingly, consumption xi has the dimension m3 / hour . In the transition to practical
calculations, where m3 / s (or m3 / hour ), ri should be divided by 3600 (or 86400).

We will demonstrate the application of Kirchhoff’s laws and closing relations
using the example of the network shown in the figure.

q4
x1, y1, z1 q2
x4, y4, z4

x3, y3, z3

q1 I I

I

x2, y2, z2 x5, y5, z5
q3

Figure.1. Schematic representation of a bypass
pipeline network discussed in the text

Nodes 1, 2, 3 and 4 (in the figure, according to the indices at q ) are characterized

by the leveling height hj and supply intensities q1  0 and selection q2,q3,q4  0 .

Sites are characterized by indicators xi , yi xi , yi и zi .

The mathematical representation of the first law of Kirchhof for nodes 1, 2, 3 and
4 has the following form

 q1  x1  x2 ,

x1  q2  x3  x4 ,
x2  x3  q3  x5 ,
(5)

 x4  x5  q4.

The second law of Kirchhof for contours I and II has the form

 y1  y2  y3  0,

 y3  y4  y5  0. (6)

Closing ratios between xi and yi described according to (4):

 y1  z1  r1x1  0,
y2  z2  r2 x2  0,

 y3  z3  r3x3  0,
y4  z4  r4 x4  0, (7)

 y5  z5  r5x5  0.

In equations (6) value yi we replace the values determined by (7). After simple
modifications we get

 r1x1  r2 x2  r3x3  ZI  z1  z2  z3  ,

r3x3  r4 x4  r5x5  ZII  z3  z4  z5 . (8)

So, we have 6 equations from (5) and (8) to determine the values of five
unknowns. To ensure the uniqueness of the solution, according to I. Charny, we remove
the equation from (5) related to the node with a given pressure. Let us assume that at
node 1 the pressure value is set p1. Then our system receives the form

 x1  x3  x4  q2 ,
 x  2  x3  x4  x5  q3,
 x4  x5  q4 ,
 r1x1  r2 x2  r3x3  ZI , (9)
r3x3  r4 x4  r5x5  ZII ;

where the notation was used

ZI  z1  z2  z3 и ZII  z3  z4  z5 .

To determine the district costs xi for given values r1, r2, r3, r4, r5, q2, q3, q4, ZI and
ZII Cramer's method was used. When calculating the values of the determinants, the
Sarrus rule was used, taking into account the sparseness of the matrices of the
calculated determinants. The calculation of the product of the elements of a fixed
diagonal of the determinant was stopped when the first zero element was found and,
taking the term corresponding to this diagonal as zero, they proceeded to the
calculation of the product of the elements of the next diagonal.

According to the obtained values of sectional flow rates from (4), pressure drops
were found in the sections. Further, in chains, starting from node 1, the nodal pressures
were found, taking into account the direction of the flow in the sections according to
the formula yi  (н )i  (к )i . For example, from yi  2  1 found 2 , y4  4  2
Found 4 .

The scheme shown in the figure is borrowed from a textbook on physics and
somewhat modified in relation to the hydraulic problem: in nodes 2 and 3, liquid
selection was taken into account. Of course, in this case, the fluid flow rate at node 4
is determined from the equality q1  q2  q4  0 . When setting the task of hydraulics, a
change in leveling height was added to the task of the electrical circuit. These two

factors took into account the features of the hydraulic circuit. By ignoring them (

q2  q3  0 , q4  q1 : h1  h2  h3  h4  0 ) and under conditions r1  r5  r, r2  r4  3r and

r3  2r from the decision followed R0  7 r R0  7 r , which is consistent with the
4 4

solution from the tutorial.

CONCLUSION

Analysis of the above algorithm shows the following:

- when considering the transitional and turbulent flow regimes, the closing

relations will contain unknowns with a degree different from unity, while the Cramer

method should be replaced by another method, for example, Newton’s method

(Ermolaeva N., 2017);

- the presented algorithm can be used with a limited number of contours, nodes

and arcs, only if there is a single supply node;

- if there is more than one supply node in the scheme, it is necessary to introduce

additional arcs that reflect the intensity and pressure of the supply.

REFERENCES:
1. Charny I.A. (1975) Unsteady motion of real fluid in pipes. 2nd ed. – Moscow:
Nedra. – 296 p.
2. Mirkin A.Z., Usinsh V.V. (1991) Pipeline systems: – Moscow: Chemistry. –
256 p.
3. Anderson D., Tannehill J., Pletcher R. (1990) Computational fluid mechanics
and heat transfer: In 2 vols. Transl. from English. – Moscow: Mir. – pp. 392-728.
4. Popov D.N. (2001) Mechanics of hydraulic and pneumatic drives: Textbook
for universities. – Moscow: Publishing house of N.E. Bauman MSTU. – 320 p.
5. Korotaev Y.P., Shirkovsky A.I. (1997) Gas production, transportation and
underground storage. – Moscow: Nedra. – 487 p.
6. Ermolaeva N.N. (2017) Mathematical modeling of non-stationary nonisothermal processes in a binary non-isothermal multiphase medium: Diss. ... Doc.
Phys. - Math. Sci. – St. Petersburg. – 323 p.
7. Yuan Q. (2018) Study on the restart algorithm for a buried hot oil pipeline
based on wavelet collocation method // International Journal of Heat and Mass Transfer
Volume 125. Pp. 891-907. https://doi.org/10.1016/j.ijheatmass
8. Sennova E.V., Sidler V.G. (1987) Mathematical modeling and optimization
of developing heat supply systems: – Moscow: Nauka. – 219 p.
9. Merenkov A.P. Khasilev V.Y. (1985) Theory of hydraulic circuits. – Moscow:
Nauka. – 278 p.

10. Akbasov A.R. (2011) Development of an intelligent management system for
city heating networks: Diss... Ph.D. – Almaty, Kazakh National Technical University
named after K.I. Satpaev. – 115 p.

11. Deng Y. et al. (2018) A method for simulating the release of natural gas from
the rupture of high-pressure pipelines in any terrain // Journal of Hazardous Materials
Volume 342. – pp. 418-428.

12. Khujaev, I., Akhmadjonov, S., Aminov, Kh., Mamadaliev, Kh. Study of
Transition Process Features in Short Gas Pipelines by the Method of Characteristics.

13. Hamdamov M.M., Ishnazarov A.I., Mamadaliev K.A. (2023) Numerical
Modeling of Vertical Axis Wind Turbines Using ANSYS Fluent Software // Lecture
Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence
and Lecture, 13772 LNCS, p. 156–170

14. Bazarov O., Khujaev I., Mamadaliev K., Khodjaev S. (2021) Numerical
method for solving the problem of the gas-dynamic state of a main gas pipeline section
relief of a variable cross-sectional area // IOP Conference Series: Materials Science
and Engineering, 1030(1), 012126

15. Khujaev I., Mamadaliev K., Aminov X. (2021) Research of the elementary
section of a gas pipeline under gas outflow from its end to the environment //
International Conference on Information Science and Communications Technologies:
Applications, Trends and Opportunities, ICISCT.

16. Khujaev I., Shadmanova, G., Mamadaliev, K., Aminov, K. (2020)
Mathematical modeling of transition processes due to a change in gas consumption at
the ends of the inclined section of the gas // 2020 International Conference on
Information Science and Communications Technologies, ICISCT 2020, 9351523.

17. Khujaev I.K., Fayziev R.A., Hamdamov M.M. (2023) Numerical Solution of
the Combustion Process Using the Computer Package Ansys Fluent // Lecture Notes
in Computer Science (including subseries Lecture Notes in Artificial Intelligence and
Lecture, 13772 LNCS, P. 26–37.

18. Hamdamov M., Khujaev I., Bazarov O., Isabaev K. (2021) Axisymmetric
turbulent methane jet propagation in a wake air flow under combustion at a finite
velocity // IOP Conference Series: Materials Science and Engineering, 1030(1),
012163

19. Khujaev I.K., Hamdamov M.M. (2021) Axisymmetric turbulent methane jet
Propagation in a co-current air flow under combustion at a finite velocity // Herald of
the Bauman Moscow State Technical University, (5), p. 89–108.