MATHEMATICAL MODELING OF A RING GAS PIPELINE IN THE
PRESENCE OF A SECTION WITH UNIFORM GAS OFFTAKE
Hamdamov Muzaffar Muhiddinovich
Institute of Mechanics and Seismic Stability of Structures
named after M. T. Urazbayev of the Academy of Science of the
Republic of Uzbekistan,
Teacher of the Department of “Exact sciences”
of the Oriental University
Tel.: +998 97 738-40-62
e-mail: mmhamdamov@mail.ru
Khujayev Ismatulla Kushayevich
Institute of Mechanics and Seismic Stability of Structures
named after M. T. Urazbayev of the Academy of Science of the
Republic of Uzbekistan
Annotation. The paper discusses the problems of mathematical modeling of an
annular gas pipeline in the presence of a section with uniform track gas extraction.
When designing an urban distribution network of gas pipelines and a gas collection
collector, they often refer to the ring structure of the gas pipeline network. The
solution of the problem that arises in the design and hydraulic calculation of the ring
network is demonstrated. The distribution of gas pressure and other parameters along
the ring network is determined. It is limited to considering only the friction force,
which is determined from the solution of the system of equations of conservation of
momentum and mass of gas, as well as the equation of state of real gases.
Keywords: ring gas pipeline, gas collection collector, ring set, friction forces,
momentum and masses of gas, equations of state of real gases.
HALQALI GAZ QUVURINING BIR MAROMDA GAZ HAYDOVCHI QISM
MAVJUDLIGIDAGI MATEMATIK MODELLANISHI
Hamdamov Muzaffar Muhiddinovich
O‘zbekiston Respublikasi Fanlar akademiyasi
M. T. O‘razboyev nomidagi Mexanika va inshootlarning
seysmik mustahkamligi instituti;
Oriental universiteti, Aniq fanlar kafedrasi o‘qituvchisi
Tel.: +998 97 738-40-62
e-mail: mmhamdamov@mail.ru
Xo‘jayev Ismatulla Kushayevich
O‘zbekiston Respublikasi Fanlar akademiyasi
M. T. O‘razboyev nomidagi Mexanika va inshootlarning
seysmik mustahkamligi instituti
Annotatsiya. Maqolada gaz qazib olish bir xil bo‘lgan uchastka mavjud
bo‘lganda halqali gaz quvurini matematik modellashtirish muammolari ko‘rib
chiqiladi. Gaz quvurlarining shahardagi taqsimlash tarmog‘ini va gaz yig‘uvchi
kollektorni loyihalashda ko‘pincha gaz quvurlari tarmog‘ining halqa tuzilishi metodi
ko‘proq qo‘llaniladi. Halqali tarmoqni loyihalash va gidravlik hisoblashda yuzaga
keladigan muammoning yechimi ko‘rsatilgan. Gaz bosimi va boshqa parametrlarning
halqa tarmog‘i bo‘ylab taqsimlanishi aniqlanadi. Maqolada tadqiqot ishlari gaz
impulslari va massasining saqlanish tenglamalari tizimini, shuningdek, haqiqiy gazlar
holati tenglamasini hal qilishdan aniqlangan ishqalanish kuchini ko‘rib chiqish bilan
chegaralanadi.
Kalit so‘zlar: halqa gaz quvuri, gaz yig‘uvchi kollektor, halqa to‘plami,
ishqalanish kuchlari, gazning impuls va massalari, haqiqiy gazlar holati
tenglamalari.
МАТЕМАТИЧЕСКОЕ МОДЕЛИРОВАНИЕ КОЛЬЦЕВОГО
ГАЗОПРОВОДА С ГАЗОДВИЖНЫМ УЧАСТКОМ ОДНОВРЕМЕННО
Хамдамов Музаффар Мухиддинович
Институт механики и сейсмостойкости сооружений
им. М.Т. Уразбаева Академии наук Республики Узбекистан;
Преподаватель кафедры Точных наук
университета Ориентал
Тел.: +998 97 738-40-62
e-mail: mmhamdamov@mail.ru
Худжаев Исматулла Кушаевич
Институт механики и сейсмостойкости сооружений
им. М.Т. Уразбаева Академии наук
Республики Узбекистан
Аннотация. В статье рассматриваются вопросы математического
моделирования кольцевого газопровода при наличии участка с равномерной
газодобычей. При проектировании городской газораспределительной сети и
газосборного коллектора чаще всего применяется метод проектирования
кольцевой газопроводной сети. Представлено решение проблемы, возникающей
при проектировании и гидравлическом расчете кольцевой сети. Определено
распределение давления газа и других параметров по кольцевой сети.
Исследовательская работа в статье ограничивается рассмотрением системы
уравнений сохранения импульса и массы газа, а также силы трения,
определяемой из решения уравнения состояния реальных газов.
Ключевые слова: кольцевой газопровод, газосборник, кольцевая сборка,
силы трения, импульс и масса газа, уравнения состояния реальных газов.
INTRODUCTION
When modeling the distribution network of gas pipelines, the concept of "route
offtake" is used. The total offtake from certain points of the gas pipeline, located
along the length L of the gas pipeline section, is divided by the length L and thus the
intensity of the route offtake is introduced. Various problems combining concentrated
and route offtake of gas are considered and solved in (Korotaev Y., Shirkovsky A.,
1997).
When designing an urban distribution network of gas pipelines and a gas
collection manifold, the ring structure of the gas pipeline network is often referred to.
Below we demonstrate the solution of an exemplary problem that arises in the design
and hydraulic calculation of a ring network.
RESEARCH METHODOLOGY
Let us assume that the ring, starting from the point of gas supply
counterclockwise to the length l1 , and clockwise to the length l3 passes through an
uninhabited area. Gas is off taken only in the section of length l2 . Thus, the length of
the ring is L l1 l2 l3. The diameter of the gas pipeline is the same everywhere and
equal to D . The intensity of the gas supply is M 0 , and the value of the pressure at the
supply point is р0. Then the uniform gas extraction in the second section is
m M 0 l2 [kg m1 s1].
It is required to determine the distribution of gas pressure along the ring
network.
Let us turn to the quasi-one-dimensional equations of state of gas in a pipeline,
the solution to which will be used in the future for the problem posed.
If we restrict ourselves to considering only the friction force, the gas-dynamic
state of gas in the pipeline section is determined from the solution to the system of
equations for the conservation of momentum and mass of gas, and the equation of
state of real gases (Korotaev Y., Shirkovsky A., 1997):
dp w2 0,
dx 2D
(1)
M M0 mx wF, p Z RT.
It was assumed here that at the beginning of the route offtake x 0 , the pressure
is рв, and the flow rate is M 0 . We also assume that diameter D , cross section f of the
pipe, the super-compressibility coefficient Z , temperature T , and gas constant R
have constant values. For m 0, there is route offtake of gas, and for m 0 , there is
a gas transport without offtake (for m 0 , we can pose the problem of a horizontal
gas well, and for const - the problem of drainage and a horizontal oil well).
ANALYSIS AND RESULTS
Let us start solving the auxiliary problem of system (1) for a linear section with
length l , where gas is off taken along the route.
To obtain a universal solution, we assume that the friction resistance coefficient
is determined by the generalized Leibenson formula (4) (Loitsyansky L., 2003):
k n
Re . (2)
D
We express the density and mass-average velocity of the gas flow through
pressure
p , w M0 mx ZRT M0 mx .
ZRT f f p
Then the Reynolds criterion represents the following variable:
Re wD ZRTD M0 mx ,
f p
where is the kinematic viscosity of gas. According to the given value of the
Reynolds criterion, the friction resistance coefficient also takes the following
(variable in x and p ) value:
n
M0 mx
,
p
k ZRTD n
where is a constant coefficient.
D f
We introduce the values of , w , and into the first equation of system (1)
and obtain the equation for the pressure distribution:
p1n dp 2 ZRT M0 mx2n 0 .
dx 2Df
If at the starting point x , the pressure value is Pв , then the solution to the last
equation has the following form:
p2n x pв2n M0 mx3n M03n pв2n M 3n x M03n ,
where 2m3 n Df 2 ZRT 2 n .
This solution for a linear section is true for x M0 . Moreover, if the end of the
m
linear section coincides with M 0 m , then a dead-end mode is considered, and
for L M0 m - the transit transport of gas with flow rate M 0 Lm is considered.
If there is no route offtake (i.e. m 0 ), then the solution to the equation for the
pressure distribution for 1 2 ZRT 2 n takes the following form:
2Df
p2n x pв2n 1M 02n x .
Such a solution can also be obtained from the previous solution for m 0 ; we
restrict ourselves to the first term of the expansion of the right-hand side in mx .
After the solution to the auxiliary problem is obtained, we proceed to the
solution to the problem posed.
Since l1 l3 , gas consumption in the first M1 and third M 3 sections will be
different. However, considering equality M0 M1 M3 and uniform route offtake, it
is possible to determine the points of zero flow velocity LП in the ring network,
depending on M1 of the right arc side. In the counterclockwise direction, the gas
travels the distance of l1 without losing mass, and then there is an off-take with
intensity m . Then the flow rate M1 is off taken in a section with length M1 m , so in
the counterclockwise direction LП l1 M1 m . Accordingly, in the clockwise
direction, this distance is L LП lЛ l3 M3 m .
Since the auxiliary formulas are obtained for x ascending in direction of gas
flow, we will conduct hydraulic calculations separately for each arc (Sennova E.,
Sidler V., 1987).
In the counterclockwise direction
p12n pв2т 1M12nl1 ,
1 3т 1M13n
2n 2n 3nM LП M1
pc p1 ,
m3 n m3 n
where we use the zero flow rate condition for x LП , and is expressed by 1 .
Hence, for the sector with counterclockwise gas flow the following holds
pc2n pв2n 1M 12n 1 M1 .
m3 n
In the clockwise direction
p22n pв2т 1M 22nl3,
pc2n p22т 1 M23n m3 n .
Adding term by term, we obtain
pc2n pв2n 1M 22т 1 M 2 .
m3 n
Since the differential pressure squared in the right and left arcs of the ring,
bounded by the inlet point and point M 0, have the same values, we obtain an
equation that is transcendental in form:
M12 n 3 n l1m M1 M 2 n 3 n l3m M .
2
2
Or taking into account M 2 M0 M1 , we have
3 nm l1M12n l3 M0 M1 2n M13n M0 M1 3n .
For a laminar flow regime, when the Stokes formula 64 Re is used for the
drag coefficient (Khujaev I., Fayziev R., Hamdamov M., 2023), this equation takes
on the following linear form:
2ml1M1 l3 M 0 M1 M12 M 0 M1 2 2M0M1 M 02 .
From here we find
M1 2ml3M0 M02 .
2mL 4M0
For a developed turbulent flow around a rough surface n 0 , the equation has
the third order and can be solved by known analytical methods. In other cases, the
transcendental equation is solved numerically, for example, using the dichotomy
method.
The problem of equality of arc lengths l1 l3 is simply solved when the pressure
drop to the section with linear gas offtake is the same for the left and right arcs. Then
the lowest pressure is reached at LП LЛ L 2 , and the gas flow rates along the arcs
are the same: M1 M 2 M 0 2 .
After solving the problem of determining M1 and M 2 , it is possible to
determine the pressure distributions over the ring network.
The case of l1 l3 0 is of particular interest. As in the case of l1 l3 0 , here
we have hydraulic symmetry, i.e. on both arcs, the distribution of pressure and flow
rates will be the same. The distribution of pressure along the arcs under a developed
turbulent flow regime, as already noted, is described by the following formula:
p x p02 3M02mx 3M0m2x2 m3x3 ,
and the lowest pressure is achieved at LП LЛ L 2 and, due to mLП mLЛ M 0 2,
is:
p LП p02 7 M 03 .
8
At the same time, when distributing gas in a linear structure of the network, we
have
p L p02 M 03 p LП ,
which proves the usefulness of the ring method of organizing gas distribution.
If it is impossible to specify in advance the connection points of consumers, or
the number of connections is large enough, then the “route offtake” approach proves
useful. Moreover, the flow regime is usually assumed laminar. It is difficult to
substantiate such an assumption. For example, we can take the smallest value of the
Reynolds criterion according to the data 12,310 6 Н s m2 , D 0,012 m ,
1,205 0,70 3 2,5kg m3 (Khujaev I., Hamdamov M., 2021). Then
wD wD 7,0 0,012 2,5 4
Re 6 1,7510 .
12, 3 10
This value is much higher than the critical Reynolds number. That is, it can be
noted that the assumption of a laminar flow regime is associated with a simplification
of the computational process. However, these formulas can be safely used in the
pipeline transport of fluids.
Let us consider the laminar flow regime.
As 0 (transition to a horizontal gas pipeline), we obtain
p 2 8 M0 1 x ,
f
hence, the following solution
8 1 x2 1
p x p0 2 M 0 .
f 2
Considering m Q , where Q is the total route offtake from the section,
M 0 LM 0
we transform the solution for the entire length of the section:
8 M0 M0x2 M02 8 M K2 M02
p0 pK 2 2 L
f 2 M0 f 2Q
2 8 M K M0 M K M0 L 2 8 M K M0 L
f 2MK M0 f 2
8 2M0 Q 8 Q
2 L 2 M0 L.
f 2 f 2
This formula states that at a uniform route offtake from a linear section of a gas
pipeline with total intensity Q, the pressure drop decreases by 2 8 Q L as compared
F2
to the case without route offtake.
Now let us imagine a ring with one supply node and N sections of route offtake
with different intensities. The total offtakes at the sites are q1, q2, q3, ..., qN1, qN ; the
lengths of sections - l1,l2,l3,...,lN1,lN ; the cross-sectional area of the sections -
f1, f2, f3, ..., fN1, fN . To select pressure values, we use indices from 0 to N. In this
case, indices from 0 to N correspond to the same gas supply section.
Let us assume that in sector x* lK from the starting point of the K-th section
in the counterclockwise direction, the lowest static gas pressure for the ring is
reached. Then the flow direction changes in sector x* lK . In the first section,
counterclockwise, the inlet flow is M1 . Pressure drops in elementary sections 1, 2, 3,
..., K-1 and in the first sector of the K-th section are written in the following form
(Khujaev I., Hamdamov M., 2021):
8 l1 q1
p0 p1 2 M1 ,
f1 2
8 l2 q2
p1 p2 2 M1 q1 ,
f2 2
8 l3 q3
p2 p3 2 M1 q1 q2 ,...
f3 2
8 lK1 qK 1
pK 2 pK 1 2 M1 q1 q2 q3 ... qK 2 ,
fK 1 2
pK 1 p* 8lK qK
2 M1 q1 q2 q3 ... qK 2 qK 1 .
fK 2
This system of equations contains K+2 unknown quantities
p1, p3, ..., pK1, p*, M1, . Let us try to reduce the number of unknowns. First, we
define the relationship between unknowns M1 and .
The flow rate M1 during the passage of the 1st section decreased by q1, passing
the 2nd section - by q2 , passing the 3rd section - by q3 , ..., and passing the K-1th
section - by qK1 . In the K-th section, the mass flow rate decreases by qK1 and turns
to zero. Therefore, the relationship between M1 and has the following form:
M1 q1 q2 q3 ... qK1 qK .
In this regard, the formulas for the pressure drop in elementary sections are
written in the following form:
8 l1 q1
p0 p1 2 q2 q3 ... qK1 qK ,
f1 2
8 l2 q2
p1 p2 2 q3 ... qK1 qK ,
f2 2
8 l3 q3
p2 p3 2 q4 ... qK1 qK ,...
f3 2
8 lK 1 qK 1 qK ,
pK 2 pK 1 2
fK 1 2
pK1 p* 2 8lK qK .
fK 2
We move to total counterclockwise pressure drop by summing up the following
formulas:
p0 p* 8 q1 2 l1 q2 2 l1 2 l2 q3 2 l1 2 l2 2 l3
2 f1 f1 2 f2 f1 f2 2 f3
... qK1 2 l1 2 l2 2 l3 ... 2 lK2 2 lK1
f1 f2 f3 fK 2 2 fK 1
qK 2 l1 2 l2 2 l3 ... 2 lK2 2 lK1 2 lK .
f1 f2 f3 fK 2 fK 1 2 fK
There are only two unknowns in this equation.
We do the same for the clockwise direction:
8 lN qN
pN pN 1 2 1 qK qK 1 qK 2 ... qN 2 qN 1 ,
fN 2
8 lN1 qN 1
pN1 pN2 2 1 qK qK 1 qK 2 ... qN 2 ,
fN 1 2
8 lN2 qN2
pN2 pN3 2 1 qK qK 1 qK 2 ... qN 3 ,...
fN2 2
8 lK2 qK2
pK2 pK1 2 1 qK qK 1 ,
fK2 2
8 lK1 qK 1
pK1 pK 2 1 qK ,
fK 1 2
pK p* 2 8 1 lK 1 qK .
fK 2
We calculate the total pressure drop in the clockwise direction:
pN p*
8 1 qK 2 lN 2 lN1 2 lN2 ... 2 lK2 2 lK1 2 1 lK
fN f N 1 f N 2 fK 2 fK 1 2 fK
qK 1 2 lN 2 lN 1 2 lN 2 ... 2 lK 2 2 lK 1
fN fN 1 f N 2 fK 2 2 fK 1
qK 2 2 lN 2 lN1 2 lN2 ... 2 lK2 ...
fN fN 1 f N 2 2 fK2
qN 2 2 lN 2 lN 1 2 lN 2 qN 1 2 lN 2 lN 1 qN 2 lN .
fN fN 1 2 fN 2 fN 2 fN 1 2 fN
In this equation, the number of unknowns is also two and it is necessary to take
into account equality p0 pN . Then from the two equations, it is possible to
determine unknowns p* and . Considering the transitivity of the equalities, we
compose an equation for . Equating the right sides of the total pressure drop
counterclockwise and clockwise, eliminating constant factors 8 and denoting
A0 q1 2 l1 q2 2 l1 2 l2 q3 2 l1 2 l2 2 l3
2 f1 f1 2 f2 f1 f2 2 f3
... qK1 2 l1 2 l2 2 l3 ... 2 lK2 2 lK1 ,
f1 f2 f3 fK 2 2 fK 1
AN qK 1 2 lN 2 lN 1 2 lN 2 ... 2 lK 2 2 lK 1
fN fN 1 fN 2 fK 2 2 fK 1
qK 2 2 lN 2 lN1 2 lN2 ... 2 lK2 ...
fN fN 1 f N 2 2 fK2
qN 2 2 lN 2 lN 1 2 lN 2 qN 1 2 lN 2 lN 1 qN 2 lN ,
fN fN 1 2 fN 2 fN 2 fN 1 2 fN
we obtain
A0 qK 2 l1 2 l2 2 l3 ... 2 lK2 2 lK1 2 lK AN
f1 f2 f3 fK 2 fK 1 2 fK
1 qK 2 lN 2 lN1 2 lN2 ... 2 lK2 2 lK1 2 1 lK .
fN fN 1 fN 2 fK 2 fK 1 2 fK
We divide the terms with 2, , 0 :
2qK 2 lK 2qK 2 lK qK 2 l1 2 l2 2 l3 ... 2 lK 2 2 lK 1
2 fK 2 fK f1 f2 f3 fK 2 fK 1
qK 2 lN 2 lN 1 2 lN 2 ... 2 lK 2 2 lK 1 qK 2 lK
fN fN 1 fN 2 fK 2 fK 1 fK
AN A0 qK 2 lN 2 lN 1 2 lN 2 ... 2 lK 2 2 lK 1 2 lK .
fN fN 1 fN 2 fK 2 fK 1 2 fK
Thus, in sector lK of the K-th section in the counterclockwise direction, the
pressure reaches its lowest value in the ring. In this section, the mass flow rate and
gas velocity are equal to zero. There remains the question of determining the number
of K of the section with the lowest static pressure in the ring gas pipeline. We will
schematically present changes in the mass flow rate and pressure of gas in this gas
pipeline (Fig. 1).
Fig. 1. Schematic representations of route changes in the mass flow rate and
static pressure of gas in a ring gas pipeline during route offtake with different
intensities in elementary sections
Note that in all elementary sections of the ring, except for the section with the
lowest pressure in the network, the absolute value of the pressure change is
2 8 MK MH L (in this expression, M H , M K are the inlet and outlet gas flow ratesf
2
in the elementary section). In the section with the lowest pressure, this change is less
than 2 8 M K M H L .f
2
Let us assume that the section with the lowest pressure coincided with the K-1
point (i.e. 0 in the pressure drop formulas). In this case, the absolute value of the
pressure change in the K-th section is also 2 8 M K1 M K lK . Here, condition
fK 2
p0 p* pN p* is fulfilled. Therefore, to determine the number of the sector with
the lowest pressure section in the ring, it is necessary to check the difference
K p0 p* K pN p* K , where p0 p* K , pN p* K are calculated for
0.
If the value of K is taken less than the actual value, then K 0 ; if the value of
K is taken more than the actual value, then K 0 . This statement is substantiated by
the fact that with an increase in flow rate in some direction, the pressure drop in this
direction will be intense and vice versa.
A similar reasoning is used for the case when section x* turns out to be inside
the K-th elementary section (i.e., 0 1 ). In this case, conditions K1 0 and
K 0 hold. It is easy to verify that j 0 holds for K1 0 and K 0 ; a decrease
in M1 leads to a decrease in counterclockwise pressure drop when compared to the
actually expected one. Here, M N M0 M1 increases, causing an intense clockwise
pressure drop compared to the actually expected one. Accordingly, it turns out
that j 0 .
Similar statements can be used to prove that conditions j 0 are appropriate
for j K 1, K 2,..., N 1, N .
CONCLUSIONS AND OFFERS
Thus, the number of the elementary section K with the lowest static pressure in
the ring is determined. The value of is determined by the above formula. Knowing
the value of , it is possible to determine the values of the mass flow in the points,
starting from M1 q1 q2 q3 ... qK1 qK in the counterclockwise direction,
and starting from M N M0 M1, in the clockwise direction. The values of pressure
in the nodes of the ring and the lowest value of pressure in the rings are determined
according to the above formulas for the pressure drop.
In certain elementary sections of the ring, there may be no gas offtake along the
route. For these areas, qj 0 should be taken.
By using different cross-sectional areas f j for different sections, we have
created conditions for optimizing the diameter and thickness of pipes in terms of
reducing capital investments and operating costs.
Solving this problem, we localized point x* and determined the value of the lowest
static pressure p* in the ring. The value of p* can be lower bounded; it is necessary to
ensure the minimum permissible pressure value at the consumer connection points. In
these cases, we can re-apply the algorithm with new values of p0 .
REFERENCES:
1. Korotaev Y. P., Shirkovsky A.I. (1997) Extraction, transport and
underground storage of gas. – Moscow: Nedra. – 487 p.
2. Komina G. P., Proshutinsky A.O. (2010) Hydraulic calculation and design
of gas pipelines: textbook; SPbGASU. – St. Petersburg.
3. Loitsyansky L. G. (2003) Fluid and Gas Mechanics. – Moscow: Drofa. -
840 p.
4. Yuldashev B.E., Khujaev I.K. (2013) Improved models and methods for
calculating the pipeline transport of real gases. – Tashkent: Fan va texnologiya. – 152 p.
5. Sennova E. V., Sidler V. G. (1987) Mathematical modeling and
optimization of developing heat supply systems: – Moscow: Nauka. – 219 p.
6. Merenkov A.P. Khasilev V.Y. (1985) Theory of hydraulic circuits. –
Moscow: Nauka. – 278 p.
7. Khujaev I. K., Ravshanov N., Bozorov O., Khujaev J.I. (2012)
Generalization of closing relations of Kirchhoff’s laws for various regimes of
incompressible fluid flow // Problems of Informatics and Energy. – Tashkent. - No.
2-3. – P. 25-27.
8. Khujaev I. K., Fayziev R. A., Hamdamov M. M. (2023) Numerical
Solution of the Combustion Process Using the Computer Package Ansys Fluent //
NEW2AN. pp. 26–37. https://doi.org/10.1007/978-3-031-30258-9_3
9. Hamdamov M. M., Ishnazarov A. I., Mamadaliev Kh. A. (2023) Numerical
Modeling of Vertical Axis Wind Turbines Using ANSYS Fluent Software //
NEW2AN. pp. 156–170. https://doi.org/10.1007/978-3-031-30258-9_14
10. Khujaev, I. K., Hamdamov, M. M. (2021) Axisymmetric turbulent methane
jet propagation in a co-current air flow under combustion at a finite velocity //
Bulletin of the Bauman Moscow State Technical University, Series Natural Sciences.
P. 89–108.
11. Fayziev A. R., Hamdamov M. M. (2021) Model and program of the effect
of incomplete combustion gas on the economy // ACM International Conference
Proceeding Series. P. 401–406.
12. Khujaev I., Akhmadjonov S., Aminov Kh., Mamadaliev Kh. (2023) Study
of Transition Process Features in Short Gas Pipelines by the Method of
Characteristics // AIP Conference Proceedings 2612, 030027.
13. Khujaev I., Mamadaliev K., Aminov X. (2021) Research of the elementary
section of a gas pipeline under gas outflow from its end to the environment
International Conference on Information Science and Communications Technologies:
Applications, Trends and Opportunities, ICISCT.
14. Khujaev, I., Shadmanova, G., Mamadaliev, K., Aminov, K. (2020)
Mathematical modeling of transition processes due to a change in gas consumption at
the ends of the inclined section of the gas // International Conference on Information
Science and Communications Technologies, ICISCT 2020, 9351523.